Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provides moisture-tight electrical and mechanical protection with minimum bulk. Flame retardant to BS3924. 130mic peel adhesion = 2.0N/25mm.

Non-tacky rubber tape that amalgamates itself into a strong, seamless, rubbery, waterproof and electrically insulating layer when wrapped around cables, electrical joints, hoses and pipes.

Strong, flexible aluminium foil tape on silicon paper liner for use on most surfaces. Aggressive acrylic-based adhesive, flame retardant and excellent temperature performance. Use for jointing insulation panels, sealing off air conditioning and cool/warm air flow ducting, sealing joints in ducting providing a flame-retardant vapour proof barrier. Also ideal for general repairs to gutters, downpipes, ducting and other surfaces. UV-resistant and waterproof. Temperature range from -20° to +100°.

Reduces the risk of accidents on slippery, uneven or split-level floor surfaces. High quality abrasive on PVC carrier with an aggressive solvent-based adhesive. Quick and easy to apply. Available in a range of colours designed to blend in with existing flooring or to denote a hazard.

PVC carrier and rubber adhesive, resistant to most common solvents. Vivid colours and easy to apply. Abrasion, moisture and wear-resistant. Adheres to a wide variety of substrates. Used for lane marking, floor marking, safety coding, hazard marking, identifying, sealing, colour coding, protecting, bundling in the automotive, aerospace, military, facilities management, transportation, marine and general industries. 130mic peel adhesion = 2.2N/25mm.

Barrier safety tape that can be used to mark out hazards as necessary.

Biaxially-oriented polypropylene (BOPP) film coated with pressure-sensitive, acrylic-based adhesive. Used for carton sealing and general packaging. White background with red FRAGILE warning. Roll fits standard tape guns. 45mic peel adhesion =5.0N/25mm.

Biaxially-oriented polypropylene (BOPP) film coated with pressure sensitive, acrylic-based adhesive. Used for carton sealing and general packaging. White background with red HANDLE WITH CARE warning. Roll fits standard tape guns. 45mic peel adhesion =5.0N/25mm.

Biaxially-oriented polypropylene (BOPP) film coated with pressure-sensitive, acrylic-based adhesive. Good quality packing tape, lightweight, with good tear resistance offering consistent and reliable performance in a wide range of environments and applications. Used for carton sealing and general packaging in a wide variety of industries. Roll fits standard tape guns. 40mic peel adhesion =4.8N/25mm.

Biaxially-oriented polypropylene (BOPP) film coated with pressure-sensitive, acrylic-based adhesive. Good quality packing tape, lightweight, with good tear resistance offering consistent and reliable performance in a wide range of environments and applications. Used for carton sealing and general packaging in a wide variety of industries. Roll fits standard tape guns. 40mic peel adhesion =4.8N/25mm.

Re-cyclable, biodegradable and environmentally friendly paper tape with high tack adhesive, good peel and tensile strength, which keeps cartons firmly sealed. Cartons sealed with paper tape are easily re-pulpable for recycling. Use for packaging, bundling, storage and organisation. Also ideal for picture framing. The tape can be inscribed for easy identification of carton contents. Suitable for use in a wide range of temperatures.

General purpose crepe paper masking tape with synthetic rubber adhesive designed for everyday room temperature masking and holding applications. High hold and adhesion rate to a wide variety of plastic, metal, glass and wooden surfaces. Peels cleanly leaving no adhesive residue. Can be written on and is easy to tear. 145mic peel adhesion =6.5N/25mm.

Premium grade 14-day clean removal masking tape. Fine structure crepe-backed, pressure-sensitive tape with adhesive formulated for exposure to direct sunlight for up to 14 days with easy and clean removal from most surfaces, leaving a very clean paint line. 145mic peel adhesion =6.5N/25mm.

Low-tack crepe paper masking tape with special low-adhesion synthetic rubber adhesive designed to give a crisp, sharp line on delicate surfaces, such as freshly-painted or plastered walls, wallpaper, treated wood and emulsion paint. Peels cleanly, leaving no adhesive residue. Can be written on and is easy to tear. 150mic peel adhesion =4.5N/25mm.

Conceals and reinforces gypsum board joints. Designed for use with ready mix or setting type joint compounds, gypsum plaster veneers and general plaster to conceal and reinforce joints of interior walls and ceilings. High strength fibreglass mesh with acrylic adhesive is easy to apply and resists distortion and stretching.

Heavy duty polyethylene-coated cloth mesh carrier with hot-melt glue adhesive. Used in situations that require a strong, flexible, waterproof and very sticky tape, with a long-lasting adhesive and resistance to weathering. Instant grab adhesive ideal for professional, domestic and everyday use, repairs and maintenance. Tearable by hand.

Heavy duty bright yellow polyethylene-coated cloth mesh carrier with hot-melt glue adhesive. Used in situations that require a strong, flexible, waterproof and very sticky tape, with a long-lasting adhesive and resistance to weathering. Instant grab adhesive ideal for professional, domestic and everyday use, repairs and maintenance. Tearable by hand.

Super heavy duty polyethylene-coated cloth mesh carrier with hot-melt glue adhesive. Used in situations that require a strong, flexible, waterproof and very sticky tape with a long-lasting adhesive and resistance to weathering. Instant grab adhesive ideal for professional, domestic and everyday use, repairs and maintenance. Tearable by hand.

Plasterboard corner bead tape for finishing and reinforcing internal and external plasterboard corners, eliminating the need for rigid metal corner beads. Suitable for new build and repair work, flexible corrosion-resistant twin steel strips fit any angle where traditional corner bead won't, for example archways. No nails, screws or special tools are needed - just tape the corner and cut the tape with heavy scissors.

Clear, UV-resistant all-weather repairing tape for use in the workplace and home to repair and joint polythene and PVC sheets, repair cracked glass without impairing vision or light, and in the construction industry to seal window and door openings against moisture ingress. 130mic peel adhesion.

High-strength rubber adhesive on a soft PVC carrier. Resistant to all weather conditions. Durable over long periods of time and peels off without tearing, unlike conventional tapes. Easily torn - even with gloved hands - with no need for knives or scissors. Commonly used for sheeting off areas to prevent dust and grime on surfaces and frequently used as a form of glass masking tape.

Strong, fibreglass-reinforced, permanent double-sided tape suitable for sticking carpet to smooth tiled, wooden, metal, concrete, stone, plywood, painted and bitumen floors. Ideal for high wear areas and sticks to all carpet backings. Simple peel and stick application with instant grab can be used for many other applications.

Super hold, double-sided tape is a super-strong, hot melt adhesive on glass fibre mesh carrier. Used in high performance bonds where in most cases the tape can replace rivets, welds, liquid adhesives and fasteners. Ideal for bonding metals, most plastics, glass, sealed wood, painted surfaces and even carpets. Used for indoor and outdoor applications.