2200W Angle Grinder 230mm
Powerful 2200W motor with soft start feature, for grinding and cutting of metals, stone and concrete. Also suitable for use with wire cup brushes and flap discs. Lightweight and durable alloy gear housing. Innovative slimline soft-grip handle design for increased control and comfort even for extended periods of use. Handle adjusts 90° in either direction for optimal handling for grinding, cutting, brushing and sanding. 3-position auxiliary handle with soft grip. Easy access brush covers. Includes grinding and cutting guards, pin spanner plus soft case.
Code   Description List Price

Worktop Jig Pegs 4pk
Tough ABS plastic with tapered shoulders for tight fit. 50mm long. 10mm diameter. Compatible with Silverline Worktop Jig (633488).
Code   Description List Price

Clutch Alignment Tool Set 9pce
Aligns clutch discs on most cars and light commercial vehicles. Adapter fits through clutch plate and into pilot bushing or bearing. Electroplated for corrosion resistance. Includes centring shaft with clutch plate adaptor, 2 x pilot bearing adaptors (15.8 x 12mm and 17 x 15mm), and 8 collets (0.787" x 0.749", 0.874" x 0.812", 0.590" x 0.561", 0.624" x 0.614", 0.718" x 0.668", and 1.18" x 0.984"). Suitable for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall, VW and Volvo.
Code   Description List Price

Clutch Alignment Tool
Easy alignment for single clutch plates. Works with most cars and light commercial vehicles. Also suitable for flywheels with no pilot bearing.
Code   Description List Price

Oil Drain Plug Key Set 6pce
Double-ended steel key set in hardened and tempered steel with satin chrome finish. Fits most common vehicle oil drain plugs on engines, gearboxes and back axles. Double ended. Includes T-bar. Includes 5 keys and ten sizes: 14 x 17mm hex, 10 x 12mm hex, 9mm x 5/8" hex, 8 x 13mm square, and 3/8" x 11mm square.
Code   Description List Price

Joint Smoothing Kit 5pce
Set of plastic spreaders and spatula for smoothing over silicone joints around baths, sinks, tiles and worktops. Includes plastic silicone cutter to remove old silicone joint. Ideal for DIYers and tilers.
Code   Description List Price

Tile Cutter Wheel
Tungsten carbide replacement wheel for tile cutters, including Silverline 290193 and 510189. Includes nuts and bolts.
Code   Description List Price
633006Cutter Wheel 22mm

Centre Offset Marking Tool
Fits standard wooden pencils. Centre hole holds pencil in perfectly centred position, and notches for offset marking allow scribing of off-centre lines, or lines near the edge of large panels. Offset notches account for the tip width of a sharpened pencil for an accurately scribed line. Integral magnet allows easy storage on ferrous metal surfaces. Offsets: 1.5mm, 3.1mm, 4.7mm, 6.3mm, 7.9mm, 9.5mm and 12.7mm (1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2").
Code   Description List Price

Lathe Dust Collection System
Adjustable steel boom arm with 228mm (9") polymer dust scoop. 380mm (15") vertical mounting post and 380mm (15") adjustable connection plate. Collects shavings and dust from spindle turning projects. Flexible hose attaches to dust port without clamps. Scoop size 228 x 70mm (9" x 2-3/4") dia.
Code   Description List Price

Universal Fence Clamps 2pk
Rigid aluminium body with steel threaded components. Range of travel 12.4mm - 146mm (1/2" - 5-3/4"). Clamp arms fit into 9.5mm (3/8") holes in the top of the auxiliary fence. Secures shop-made auxiliary fences to existing fences without having the clamp interfere with the workpiece. Compact and lightweight.
Code   Description List Price

Magnetic Cord Keepers 2pk
Strong plastic with built-in earth magnet base. Adheres to any ferrous metal surface. Holds standard-thickness cords and keeps them off the floor. Ideal for table saws, band saws and other bench-top tools. Size: 22mm (7/8") thick and 38mm (1-1/2" dia).
Code   Description List Price

Clamp-It® Assembly Square
Strong, plastic assembly square clamps on either the inside or outside of a corner. Ideal for assembling drawers with lipped fronts. Holds deck balusters at a perfect 90° angle while fastening. Size 203mm (8") x 38mm (1-1/2").
Code   Description List Price

Bench Cookie® Plus Master Kit 28pce
Complete kit for gripping and protecting workpieces. Use Bench Cookie® Plus Work Grippers alone to grip and protect workpieces. Can also be used with the included standard risers and XL risers to fix to dog holes or to allow space for a router bit or jigsaw blade beneath the workpiece. Includes 8 x Bench Cookie® Plus Work Grippers, 4 x risers, 8 x extra-long risers and 8 x Bench Cookie® finishing cones.
Code   Description List Price

Universal Small Port Hose Kit 4pce
Expanding hose with flexible ports allows use of dust collection with most hand-held power tools. Includes expandable 38mm (1-1/2") ID dust hose. 57mm (2-1/4") OD swivelling port, 25.4mm (1") ID swivelling rubber dust port and 38mm (1-1/2") swivelling rubber dust port.
Code   Description List Price

Silicone Glue Kit 3pce
Complete silicone gluing kit ideal for evenly distributing glue over broad surfaces, such as when gluing up plinth blocks, corbels or thick table legs. Includes 178mm (7") glue brush, 64mm (2-1/2") x 102mm (4") glue spreader, and flexible silicone tray.
Code   Description List Price

Clamp-It® Corner Clamping Jig 3pce
Polycarbonate with thick cushioned pads to prevent marring. Extra-wide base, high walls and strong Acme-threaded clamp screw hold panels securely. Mounting holes allow for attachment to work surface for creating assembly jigs.
Code   Description List Price

Bench Cookie® Plus Kit 4pce
Newly redesigned, friction rubber pads hold projects steady while sawing, sanding, or routing without the use of clamps. A threaded insert is included for adding a variety of accessories that elevate your work and provide plenty of clearance for all project needs. Optional accessories available for the Bench Cookie® Plus: Bench Cookie® Finishing Cones, Bench Cookie® Sawhorse Clips, Bench Cookie® Finishing Bridges, and Bench Cookie® Risers.
Code   Description List Price

Small Bandy Clamp 2pce
Clamps a wide variety of edging profiles. The smaller size is ideal for thinner stock and delicate mouldings. Proprietary rubber band is made from a tough, tear-resistant material, with 3 extra-strength splines. Large, ultra-grip clamp pads hold tight without slipping. Pivoting jaws accommodate angled pieces and allow full pad contact regardless of stock thickness. Tension is adjusted by stretching the clamp further into the material.
Code   Description List Price

Bench Cookie® Cones 4pk
Fail-safe project finishing system that holds your project off the workbench with minimal surface contact, ensuring continued stability throughout the entire finishing process. Allows finishing of both sides of the workpiece without slipping or sliding and protects Bench Cookie™ Work Gripper pads from paint and other finishing products. Custom-sized to fit the Bench Dog Bench Cookie Work™ Grippers.
Code   Description List Price

Bench Cookie® Plus Risers 2pk
Doubles the height of Bench Cookie® Plus discs and raises workpieces for working with saws and other shop that require extra height. Fits 19mm (3/4") Bench Dog holes or 19mm (3/4") holes drilled into sawhorses or other fixtures.
Code   Description List Price

Small Piece Holder
Large handles for comfort and control. Sacrificial pieces (not included) can be attached to the clamp faces to prevent blow-out. Abrasive clamp faces prevent material from slipping. Maximum capacity: 214mm (8-1/2"). For router table use with a bearing guided bit.
Code   Description List Price

Bench Cookie® Plus Storage Rack
Strong storage rack holds 8 Bench Cookies. Easy to mount on a wall or workbench, and keeps Bench Cookies safely and neatly stored and close at hand. L x W x H 267 x 88 x 60mm. Fixings not included.
Code   Description List Price

Bench Cookie® Bridge
Bench Cookie® Finishing Bridges fit snugly over any Bench Cookie® to lift, grip, protect and finish smaller projects. The Bridges feature elongated contact points that allow narrow rails, stiles, dowels and louvre stock to be balanced for finishing. Minimal surface contact between the Bench Cookie® Finishing Bridges and the workpiece means virtually no marring of the finish. The Bridges stack neatly for compact storage.
Code   Description List Price

Bench Cookie® XL Riser 4pk
Triples the height of Bench Cookie® Plus discs when threaded into the centre insert. Raises workpieces for working with saws and other tools that require extra height. Fits 19mm (3/4") Bench Dog holes or 19mm (3/4") holes drilled into sawhorses or other fixtures.
Code   Description List Price

Drawer Slide Jig
Strong, plastic door slide jig allows drawer slides to be installed quickly, accurately and easily. Sliding wedge locks slide securely into the jig. Adjustable indexing foot allows perfect repeatability. Foot can be rotated for use on top or bottom. Cut-outs in jig allow access for drill and driver bits.
Code   Description List Price

Drawer Front Clamp
Dual clamp heads and micro-adjustable stops allow perfect alignment. Thin frame profile allows easy closing of drawer while the clamp is still attached, so alignment can be checked. Max drawer side thickness: 25.4mm (1-1/8"). Max drawer front thickness 25.4mm (1"). Max side overlay 44.4mm (1-3/4"). Required clearance between drawer box and cabinet frame 4.7mm (3/16").
Code   Description List Price

Bench Cookie® Sawhorse Clips 4pk
Strong, steel clips for use with Bench Cookie® Plus Work Grippers to provide stability whilst sawing, routing and sanding. Simply clip onto the sawhorse and screw Bench Cookies® on for a solid, non-slip work surface that can be easily resized for any workpiece. Fits 2x material 38mm (1-1/2") thick. Includes 4 x sawhorse clips and 4 x pan-head screws.
Code   Description List Price

Large Bandy Clamp 2pk
Proprietary rubber band made from a tough, tear-resistant material, with 3 extra-strength splines. Large, ultra-grip clamp pads hold tight without slipping . Pivoting jaws accommodate angled pieces and allow full pad contact regardless of stock thickness. Tension is adjusted by stretching the clamp further into the material. Easy clean-up—wood glue flakes off the rubber band material.
Code   Description List Price

12V Lithium Power Bank & Jump Starter
Portable compact and powerful power bank and jump starter that delivers a peak 400A boost to vehicle engines up to 2.2L petrol or 1.9L diesel. Intelligent circuitry in the Smart Jump Start Protector Unit protects vehicle and user. The 2.1A USB output can be used to charge phones, tablets, MP3 players, cameras and more. Fitted with an ultra-bright LED torch/strobe/beacon/SOS signal and LED charge level indicator. Includes lithium-cobalt polymer power bank and Smart Jump Start Protector Unit with cables and heavy duty clamps.
Code   Description List Price

Bicycle Spoke Wrench
Hardened and tempered nickel-plated steel with coloured vinyl-coated handles for comfortable handling. Black 3.2mm fits most DT spoke nipples; red 3.5mm fits most Asian manufactured wheels; green 3.3mm fits most European manufactured wheels.
Code   Description List Price
40588813 Gauge 3.5mm
84017914 Gauge 3.3mm
55839715 Gauge 3.2mm

Chain Rivet Extractor
Durable, robust and fully adjustable with large, ergonomic handle. Compatible with Shimano HG and UG, and all 7, 8, 9 10 and 11-speed chains. Includes chain-holding hook for controlled, solo use. Jaw capacity 20mm.
Code   Description List Price
4823037, 8, 9 10 & 11 Speed

Reflector Set 2pce
Set of bicycle reflectors including white front reflector with handlebar mount, and red rear reflector with seat post mounting bracket. Easy to fit (fixings included).
Code   Description List Price

Cassette Removal Tool
Forged alloy steel with satin chrome finish. Features 12 splines for the removal of Campagnolo cassettes. Use with a chain whip (available separately).
Code   Description List Price
36703912 Splines

Front & Rear Mudguard Set 2pce
Tough, flexible PVC plastic guards keeps cyclist drier and cleaner during use. Lightweight and easy to assemble. Includes sizes 315 x 75mm and 520 x 85mm.
Code   Description List Price

Bottom Bracket Cup & Crank Wrench
Heat-treated steel wrench specifically for the removal and installation of bottom brackets. Powder-coated for corrosion resistance. Fits externally ringed bottom brackets with 16 splines, such as Shimano Hollowtech II. Includes preload tensioning tool.
Code   Description List Price
972972External 16 Splines

Mounted Stone Set 10pce
Aluminium oxide mounted stone set for sharpening, shaping, smoothing and grinding metals, alloys and hard plastics. Ideal for cleaning and deburring. Includes large and small ball, cylinder, cone, tree and taper stones. 5 stones with 3mm arbor and 5 x stones with 6mm arbor. For use with power drills and die grinders
Code   Description List Price
6308466mm & 3mm Shanks

Hay Rake
Traditional wooden rake with wide head and long reach. Ideal for gathering straw, hay or grass. 16 dowelled peg teeth. Length 1700mm. Width 730mm.
Code   Description List Price

Hammer-Through Screwdriver Slotted
2-component soft-grip handle, capped with a metal striking plate and a blackened tip. Chrome vanadium, satin finished, hexagonal shaft for use with a spanner for additional torque. Tang-through design transmits the striking force from the striking cap straight through to the tip. Impact-resistant, mixed polymer handle.
Code   Description List Price
8036756 x 150mm
821464PZ1 x 75mm
957341PZ2 x 100mm

3-Digit Combination Car Key Safe
Polymer-coated stainless steel body and hardened polymer-coated shackle. Key-free combination lock. Portable safe for storing keys safely and securely. Can be attached to tow hook, door handle or roof rack. Suitable as a key deposit to hold car keys or spare house keys. Ideal to keep keys secure while owners are away from their vehicles on sporting activities, such as surfing and diving. Also suitable for shared cars, company vehicles and car rental companies. Storage compartment dimensions: 60 x 80 x 20mm.
Code   Description List Price
69243775 x 170 x 50mm

Bolton Twill Dust Sheet
Thick, close-weaved 100% cotton Bolton twill dust sheet for protection of carpet, flooring, furniture and other large objects during decorating and DIY. Protects against paint, dust, dirt and debris. Also ideal for use as temporary car seat or sofa cover. Washable and reusable for a long service life.
Code   Description List Price
4344913.6 x 2.7m  (12' x 9') Approx

Barrier Tape
Barrier safety tape that can be used to mark out hazards as necessary.
Code   Description List Price
53535070mm x 500m Yellow/Black

We accept:

Shop By

Bench Dog
View our latest Toolbook
Download on the App Store
Download on the App Store